Dimensions

Cabinet Height

850mm

Cabinet Width

500mm

Cabinet Depth

360mm

The Heat range offers a number of key features that enables ease of installation, maintenance and operation.

Available in outputs of 45 and 55kW, the Heat range is designed to ensure all installation requirements can be achieved.

The lightweight design is supported through quality build and aesthetics that allow for the boiler to be installed either on the wall or into a prefabricated floor mounted frame including back-to-back options.

Supported by a 5 year parts and labour warranty*, the Heat is a reliable and efficient wall hung solution. The quality of this product range has been developed through meticulous design, careful component selection and proving; leading to reliability and longevity.

The range provides high efficiencies for low running costs with up to 110% part load and seasonal efficiency (ref Building Regs Part L2) up to 97%. The range also provides low NOx emissions at Class 5 and at less than 40mg/kWh achieve maximum points under BREEAM schemes.

The Heat boasts easy to read boiler controls featuring large backlit display with five lines of plain English text. The light weight design of the product ensures easier installation for the engineer. The single width and height, irrespective of model, is also easier to site.

With a high specification as standard, including two remote alarm contacts, BMS (0-10v) control and high 5:1 turndown which aids efficiency and minimises running costs through closer load matching-the new Heat provides peace of mind and the perfect solution for a wide variety of commercial installations.

MULTIPLE BOILER INSTALLATIONS

The boilers can be installed on Rigs - a pre-assembled frame and low loss header kit incorporating sequencer controls for 2 - 3 boilers. The maximum outputs are 90kW (2 x 45kW), 110kW (2 x 55kW), 135kw (3 x 45kW) and 165kw (3 x 55kW). The heat only boilers can also be sited independently in cascades of upto 4 appliances. The maximum outputs are 180kW (4 x 45kW) and 220kW (4 x 55kW).

  • High efficiency

  • Condensing output 45kW

  • Inbuilt weather compensator

  • Inbuilt pump (low energy modulating)

  • Minimum pressure 0.3 bar

  • Minimum head 3m

  • Twin flue up to 21m**

  • Small installation footprint

  • Low NOx

  • 50mm MuPVC solvent weld flue allowing simple, cost effective installations***

  • Commercial control system

  • Compatibility as standard

  • 5 year warranty*

*5 year warranty subject to Terms and Conditions. 5 years parts and labour warranty available subject to being commissioned by Keston.

** For maximum total equivalent flue length please refer to the installation instructions for full details

*** The only systems approved for this application are: Marley muPVC (PVC-C) Solvent Weld Waste System (50mm), Polypipe System 2000 muPVC (PVC-C) Solvent Weld Waste System (50mm), Polypipe Terrain Solvent Weld System (50mm) and Wavin Osma PVC-C Solvent Weld System (50mm). Please use the recommended Solvent Weld Cement for each system.


Heat 45 Technical Specificaton