KESTON qSpa Un-vented cylinder
Traditional hot water systems
require a tank in the loft space, which in turn feeds
a cylinder in the airing cupboard, this heats and
stores your hot water ready for use.
This type of
system has many failings not least of which a poor
flow rate to taps and showers. Secondly
as the water is stored in an open tank in the loft
it is susceptible to bacteriological infections
and pests.
Furthermore it takes up space, is prone
to freezing in winter and noisy.
Finally it takes
considerable time to heat your water.
The solution to all of these issues is a Keston
qSpa Un-vented cylinder.
Because of its design
the Keston qSpa takes its water supply directly
from the mains which
gives
you very
high flow rates, which means quick filling
baths and highly invigorating showers.
There
is no need for power shower units as the Keston
qSpa will deliver a much higher
performance
Add to this there is no need for tanks
in the loft space anymore, therefore you
are
guaranteed
of
clean potable water – and no risk
of freezing in the winter.
Also as the qSpa
is mains water fed the
unit can be fitted anywhere in the house
(even
in the
garage or cellar)
The design of the unit
features a high performance heating coil which
reduces the time to heat
your water therefore you will never
normally run out
of hot water.
The built immersion heater
ensures that you have an alternative means
of heating
your
water as
a back up.
Comfort, performance
and security are the hallmarks of The Keston
qSpa range.
STAINLESS STEEL UNVENTED WATER STORAGE
SYSTEMS (125-400 LITRES)
The Keston qSpa, like all
other Keston appliances, is described as highly
eco-friendly, cost and energy
efficient, keeping in line with the company's established
reputation for reliability, durability and high
performance.
The qSpa range can be used for both
domestic and commercial applications, with unit sizes
ranging
from 125L,
150L, 200L, 300L and 400L with ultra large coil
sizes.
Unlike many water storage systems,
Keston qSpa has an external expansion vessel. This
was designed
so that the full tank volume could be used
for storing
water. The qSpa systems feature temperature
and pressure relief valves, overheating controls,
thermostats
and complete unvented controls kits.
They also
boast
purpose-designed connections for a secondary
return loop and/or drain off.
|
